Intelligent induction parking lock function operation instructions

Parking lock operation instructions

Boot instructions

ø Normal startup indicator: the parking space is locked and the red light blinks for about 1 second and then goes out.

Anti-interference channel scanning indicator: the green light on the parking space lock blinks repeatedly at an interval of 1-2 seconds, which means that the parking space is in the scanning channel state. If the green light is steady on, the buzzer rings once, which means that the channel scanning is completed and the parking space enters the normal standby state. The longest scanning time is about 60 seconds.

Intelligent sensing remote control operation instructions (all the following operations must be within the sensing range)

Manual/automatic mode description

ø Manual/automatic mode:

ø Manual/automatic mode switching method: Press and hold the button until the green light blinks for 1 second, indicating that the mode switching is successful. Then release the button.

¨ Button description

Manual mode lock/lock remote control: press the button, the green light flashes, lock; Press the button short, the green light flashes and locks.

ø ID learning function: Parking lock on electric switch on again when the power is cut off, anti-jamming after channel scan, parking lock on a green light, normally on the parking lock open learning model, can learn the intelligent remote control (learning mode for about 20 seconds), long press the button (green light intermittent flash) remote control learning code, if the red light, the remote control for learning code, success at this moment can loosen the button.

ø Smart remote control learning code erasing function: long press + combination button until the red light flickers on the remote control, indicating that the erasing is successful. (Note: Careful operation of this function will lead to failure of the remote control)

Indicates the low battery status

ø Low power in automatic mode: the red light blinks once every 3-4 seconds, while the green light blinks once every 3-4 seconds, indicating that the battery is low, but the remote control function is effective at this time, reminding the user to charge; The red light flashes every 3-4 seconds, but the green light is off, indicating that the power is exhausted. At this time, the remote control function is invalid, reminding the user to charge as soon as possible.

ø Low power in manual mode: short press or key. If the red light flashes, the battery is low, and the user is reminded to charge the battery quickly.

ø Charge the smart remote control with the standard MicroUSB interface (universal charger for Android phones). When the red light is on, the battery is full when the red light is off.